How To Install Windows 10 Over Ubuntu

Download Commodity

This wikiHow teaches you lot how to install Windows 10 on a PC that's already running Ubuntu Linux. Before you get started, make sure you've already purchased a Windows license and product primal. Don't worry if you don't have Windows install media, every bit you lot can create a bootable USB bulldoze from a downloadable ISO image. Once you've installed Windows, you can install a tool chosen EasyBCD that allows yous to switch between operating systems at reboot fourth dimension.

1
Install Gparted if y'all haven't already. Gparted is a free partition tool with a graphical user interface that's pretty easy to apply. You tin can download it from the Software Eye or by running sudo apt-get install gparted from the control line.
- If you've already created a partitioning for Windows but it'southward non a Primary Partition, you'll take to create a new one.^[one]
2

Open up Gparted. Y'all'll run across a list of all drives and partitions.

Advertisement
3

Correct-click the partition or drive you lot desire to edit and select Resize/Movement . This allows you to create a new partition from an existing one.
4

Enter the new partition size (in MB) into the "Free space following" blank. You should classify at least xx GB (20000 MB) for Windows 10. If you plan to install apps and use Windows regularly, you'll probably want to increase that amount.^[2]
5

Select Master Partition from the "Create as" bill of fare. It's on the right side of the window.
6

Select ntfs from the "File System" menu. It'due south on the right side of the window.
7

Blazon Windows10 into the "Label" field. This is but so you tin can hands identify the partitioning.
8

Click Add together . It's at the lesser-right corner of the window.
9

Click the green check mark button. Information technology'due south in the toolbar at the top of Gparted. This creates the sectionalisation, which may take a little while. When the division is ready, click Close at the bottom-correct corner of the window.

Advertizing

i
Install UNetbootin from the Software Middle. This is a free application that lets y'all create a bootable USB bulldoze in Ubuntu. To learn more than virtually UNetbootin, encounter https://unetbootin.github.io.
- Yous'll need either a blank USB drive with at least viii GB of infinite to create install media. Any data on the USB drive will be erased during this process.^[3]
- For assistance installing software on Ubuntu, see How to Install Software in Ubuntu.
two
Become to https://www.microsoft.com/en-us/software-download/windows10 in a web browser. If you lot don't already have a bootable Windows DVD or USB drive, you tin can create a one from a downloadable ISO.
- Yous must accept a license to install Windows ten. This means you should take already purchased Windows 10 and accept a valid production key.
3

Select the latest version of Windows ten and click Confirm . Additional options will expand at the lesser of the page.
4

Select a linguistic communication and click Confirm . You'll cull the language from the drop-downward menu beneath "Select the production language."
v

Click 32-fleck Download or 64-bit Download . This downloads the ISO to your default download location.
vi

Open up UNetbootin and insert your USB drive. Opening UNetbootin displays the welcome screen where you can cull your bootable drive parameters.
7

Select the "DiskImage" radio push button. It's toward the bottom-left corner of the window.
8

Select ISO from the "DiskImage" carte. It's to the right of the radio button.
ix

Click the three-dot … button. This opens your file browser.
x

Select the file you just downloaded from Microsoft. Information technology's the 1 that ends with .iso.
11

Select USB Drive from the "Type" menu. It's at the bottom-left corner of the window.
12
Select your USB drive from the "Drive" carte du jour. This is the device characterization for your USB drive.
- If yous can't select your USB drive, it likely needs to be formatted to the FAT32 file arrangement. You can exercise this in the file manager by correct-clicking the USB bulldoze and selecting Format.^[iv]
13

Click OK . This creates a bootable Windows 10 USB drive from the downloaded ISO image. Once the drive is ready, you'll run across "Installation Complete."
14

Click Exit to close UNetbootin.

1
Restart your computer into the BIOS/UEFI. The steps to enter the BIOS/UEFI depend on your PC manufacturer and model. You'll usually have to press a certain fundamental (often F2 , F10 , F1 , or Del ) correct after the calculator starts kicking up.
- Insert the USB drive into a gratuitous USB port if y'all haven't already.
2

Set the USB drive to come commencement in the boot order. You'll ordinarily exercise this in a menu chosen "Boot" or "Boot Club." The steps to practise this vary by PC, but yous'll usually have to select USB Drive and marker it as 1st Boot Device. Check your PC manufacturer's website for more specific instructions about your BIOS/UEFI.
three

Save your changes and exit the BIOS/UEFI. Most BIOS/UEFI brand the "Salve" and "Go out" keys very clear somewhere on the screen. Once you exit the BIOS/UEFI, your calculator will boot from your USB drive and display the "Windows Setup" window.
iv

Click Custom: Install Windows only (advanced) . It'southward the second pick on the window. A list of partitions will appear.
five

Select the Windows10 sectionalization and click Next . This is the partition y'all simply created. Windows will now install on the selected sectionalisation.
six

Follow the on-screen instructions to install Windows. In one case you end the setup, you'll boot to the Windows desktop.
7

Advert

1

Open the Microsoft Edge web browser. Yous'll find information technology in Get-go menu, which is at the bottom-left corner of the screen. The final part of the process is setting upwardly your computer to permit you kicking from either Windows 10 or Ubuntu at start upwardly.
2

Navigate to https://neosmart.net/EasyBCD. EasyBCD is a costless tool that lets yous fix up dual-kick from within Windows.
3

Roll downward and click Annals under "Non-commercial." This brings you to a sign-up page.
iv

Enter your proper noun and email address and click Download . This should beginning the download immediately, but y'all might have to click Save or Download to confirm.
5

Click the file you simply downloaded. It'southward the file that starts with EasyBCD. You should see it virtually the lesser of the browser. If you don't, press Ctrl+J to open up the Downloads list and click it there.
6

Click Yes to let the app to run.
vii

Follow the on-screen instructions to install EasyBCD. In one case the app is installed, it will exist added to the Commencement menu.
8

Open EasyBCD. It's on the Showtime carte du jour, which you can get to by clicking the Windows button at the bottom-left corner of the screen.
9

Click the Linux/BSD tab. It'due south near the top of the app.
10

Select Grub 2 from the "Type" menu. Information technology's near the top of the tab.
11

Type Ubuntu into the "Name" field. Information technology's right below the "Type" menu. This is how Ubuntu will announced in the kicking card.
12

Select Automatically locate and load from the "Drive" bill of fare.
thirteen

Click the Add Entry push button. Information technology's right beneath the "Bulldoze" menu. This adds an choice for Ubuntu to the standard Windows boot menu.^[5]
14

Remove the USB drive and restart the PC. You can restart the PC by clicking the Beginning menu, selecting the Power button (information technology looks similar a knob), and choosing Restart. When the PC comes back upward, it will boot to a screen that allows you to select either Windows 10 or Ubuntu. Selecting one or the other will boot into that operating system.

Ask a Question

200 characters left

Include your electronic mail address to get a bulletin when this question is answered.

Submit

Advertizement

About This Commodity

Commodity Summary X

1. Create a principal NTFS partitioning in Ubuntu.
ii. Download the Windows ten ISO from Microsoft.
3. Install UNetbootin from the Software Center.
iv. Use UNetbootin to create a bootable USB Windows ten drive.
v. Boot from the USB bulldoze.
six. Follow the on-screen instructions to install Windows.
7. Connect to the internet and download EasyBCD.
viii. Employ EasyBCD to add Ubuntu to the boot menu.

Did this summary help yous?

Thanks to all authors for creating a folio that has been read 187,158 times.